ALIENWARE® M18x
MOBILE MANUAL
CONTENTS
CHAPTER 1: SETTING UP YOUR LAPTOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Before Setting Up Your Laptop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Press the Power Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Set Up Microsoft Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Set Up WirelessHD (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Set Up Wireless Display (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CHAPTER 3: USING YOUR LAPTOP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using Removable Media and Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Using the Optical Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using the Integrated Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using the Wireless Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Free Fall Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Configuring the BIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Replacing the Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
CONTENTS
3
CHAPTER 5: TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Basic Hints and Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Backup and General Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Software Diagnostic Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Answers to Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
CHAPTER 6: SYSTEM RECOVERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
AlienRespawn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
My Dell Downloads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
CHAPTER 7: SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Contacting Alienware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
4
CONTENTS
Dear Valued Alienware Customer,
Welcome to the Alienware family. We are thrilled to include you among the
growing number of savvy high‑performance computer users.
e Alienware technicians who have crafted your computer have made certain
that your high‑performance computer is properly optimized and performs to its
fullest potential. We build computers with a single unwavering purpose: Build
It As If It Were Your Own. e technicians will not rest until your new computer
meets or exceeds our very demanding criteria!
We have tested your computer extensively in order to ensure that you enjoy
the highest levels of performance. In addition to a standard burn‑in period,
your computer has been evaluated using real‑world tools such as synthetic
performance benchmarks.
We invite you to share your experience with your new high‑performance computer
with us, so do not hesitate to either e‑mail or call Alienware with any questions
or concerns. e entire staff shares your enthusiasm for new technology and we
hope that you enjoy using your new computer as much as Alienware enjoyed
building it for you.
Sincerely,
Alienware Staff
5
6
Product Documentation and Media
Before Setting Up Your Laptop
Congratulations on the purchase of your Alienware M18x!
e documentation that ships with your Alienware laptop is designed to provide
answers to many of the questions that may arise as you explore your new laptop’s
capabilities. You may see the documentation for technical information or general
use as needed to answer questions in the future, or aid you in finding answers and
solutions. e media included with your laptop is referenced in some sections of
the documentation and may be needed to complete certain tasks. As always, our
technical support staff is available to assist you.
Read all safety and setup instructions before connecting your new laptop. Begin
by carefully opening the box and removing all components that were shipped to
you. Before setting up your laptop or components, be sure to inspect all items
for any physical damage that may have occurred during shipment. Be sure to
report any damaged items to customer service immediately upon receiving your
shipment. You must report shipping damage within the first 5 days of receiving
the shipment or your damage report will not be honored.
Placing Your Laptop
Before setting up your laptop or components, see the included invoice to verify
that all items ordered are present. Report any missing components to customer
service within 5 days of receiving the shipment. Anything reported missing after
the first 5 days of receiving a shipment will not be honored. Some of the most
common items to check for include:
WARNING: Do not place the laptop near or over a radiator or heating vent.
If your laptop is placed in a cabinet, ensure that adequate ventilation
is provided. Do not place the laptop in a humid location or in any area
where the laptop may be exposed to rain or water. Be careful not to spill
liquid of any kind on or into the laptop.
•
•
•
•
•
•
•
Laptop and AC adapter with power cable
Microsoft CD‑key located at the bottom of the laptop
Monitor with power cable and video cable (if ordered)
Keyboard (if ordered)
Mouse (if ordered)
Multimedia speakers and sub‑woofer (if ordered)
Joystick controllers (if ordered)
When placing your laptop, ensure that:
•
•
It is placed on a surface that is both level and stable.
e power and other cable connectors are not jammed between the laptop
and a wall – or any other object.
•
•
Nothing obstructs airflow in front of, behind, or below the laptop.
e laptop has enough room so that optical drives and other external
storage drives can be easily accessed.
You may also need a small flathead and/or a Phillips head screwdriver for
connecting peripheral cables to the laptop.
8
CHAPTER 1: SETTING UP YOUR LAPTOP
Connect the AC Adapter
Press the Power Button
WARNING: e AC adapter works with electrical outlets worldwide.
However, power connectors and power strips vary among countries.
Using an incompatible cable or improperly connecting the cable to a
power strip or electrical outlet may cause fire or equipment damage.
CHAPTER 1: SETTING UP YOUR LAPTOP
9
Connect the Network Cable (Optional)
Set Up Microsoft Windows
Your computer is preconfigured with the Microsoft Windows operating system.
To set up Windows for the first time, follow the instructions on the screen. ese
steps are mandatory and may take some time to complete. e Windows setup
screens will take you through several procedures including accepting license
agreements, setting preferences, and setting up an Internet connection.
CAUTION: Do not interrupt the operating system’s setup process. Doing
so may render your computer unusable and you will need to reinstall the
operating system.
NOTE: For optimal performance of your computer, it is recommended that
you download and install the latest BIOS and drivers for your computer
available at support.dell.com.
NOTE: For more information on the operating system and features, see
support.dell.com/MyNewDell.
NOTE: It is recommended that you create a full system backup as soon as
you set up Microsoft Windows.
10
CHAPTER 1: SETTING UP YOUR LAPTOP
Set Up WirelessHD (Optional)
Set Up Wireless Display (Optional)
e WirelessHD feature allows you to share high-definition video from your
computer display to a TV without the use of cables. To set up WirelessHD, use a
WirelessHD kit. For instructions on setting up WirelessHD, see the document that
shipped with your WirelessHD kit.
NOTE: e wireless display feature may not be supported on all computers.
For information about the hardware and software requirements for setting
up wireless display, see intel.com.
NOTE: e wireless display feature is available on your computer only if you
ordered an Intel Wi‑Fi WLAN card and NVIDIA graphics card with Optimus
technology or AMD Radeon graphics card at the time of purchase.
NOTE: e WirelessHD kit does not ship with your computer and must be
purchased separately.
If your computer supports the WirelessHD feature, the WiHD Application Controller
NOTE: It is recommended to use WirelessHD instead of wireless display for
graphic-intensive applications such as high-definition gaming.
icon
will be available on the Windows desktop.
NOTE: You may have to set up WirelessHD kit before you set up WirelessHD. e Intel wireless display feature allows you to share your computer display to a
For more information on setting up the WirelessHD kit, see the document TV without the use of cables. You must connect a wireless display adapter to your
that shipped with the WirelessHD kit.
TV before setting up wireless display.
To set up WirelessHD:
1. Turn on your computer.
NOTE: e wireless display adapter does not ship with your computer and
must be purchased separately.
2. Ensure that wireless is enabled on your computer.
3. Double‑click the WiHD Application Controller icon
NOTE: For information on setting up the wireless display, see the document
that shipped with the wireless display adapter.
on the desktop.
e WirelessHD Application Controller window appears.
4. Follow the instructions on the screen.
CHAPTER 1: SETTING UP YOUR LAPTOP
11
Setting Up a Wireless Connection
Connect to the Internet (Optional)
NOTE: To set up your wireless router, see the documentation that shipped
with your router.
Setting Up a Wired Connection
•
•
If you are using a dial‑up connection, connect the telephone line to the
optional external USB modem and to the telephone wall jack before you set
up your Internet connection.
If you are using a DSL or cable/satellite modem connection, contact your ISP
or cellular telephone service for setup instructions.
Before you can use your wireless Internet connection, you need to connect to your
wireless router.
To set up your connection to a wireless router:
1. Ensure that wireless is enabled on your computer.
2. Save and close any open files, and exit any open programs.
3. Click Start → Control Panel.
To complete setting up your wired Internet connection, follow the instructions in
4. In the search box, type network, and then click Network and Sharing
Center→ Connect to a network.
5. Follow the instructions on the screen to complete the setup.
12
CHAPTER 1: SETTING UP YOUR LAPTOP
Setting Up Your Internet Connection
ISPs and ISP offerings vary by country. Contact your ISP for offerings available in
your country.
If you cannot connect to the Internet but have successfully connected in the past,
the Internet Service Provider (ISP) might have a service outage. Contact your ISP
to check the service status, or try connecting again later.
Have your ISP information ready. If you do not have an ISP, the Connect to the
Internet wizard can help you get one.
1. Save and close any open files, and exit any open programs.
2. Click Start → Control Panel.
3. In the search box, type network, and then click Network and Sharing
Center→ Set up a new connection or Network→ Connect to the Internet.
e Connect to the Internet window appears.
NOTE: If you do not know which type of connection to select, click Help me
choose or contact your ISP.
4. Follow the instructions on the screen and use the setup information
provided by your ISP to complete the setup.
CHAPTER 1: SETTING UP YOUR LAPTOP
13
14
CHAPTER 1: SETTING UP YOUR LAPTOP
is chapter provides information about your new laptop to familiarize you with
its various features, and get you up and running quickly.
HDMI-output connector — Connects to a TV for both multi‑channel
digital audio and video signals.
4
Left View Features
NOTE: For a monitor without built‑in speakers, only the video signal will be
read.
Mini-DisplayPort connector — Connects your computer to external
5
6
7
DisplayPort monitors and projectors.
USB 3.0 connectors (2) — Provide faster data transmission between
your computer and USB devices.
Audio-out/Headphone/S/PDIF connector — Connects to amplifiers,
speakers, or TVs for digital audio output. Can also be used to connect to a
pair of headphones, powered speakers, or sound system.
1
2
3
4
5
6
7 8 9
NOTE: Use the S/PDIF adapter that shipped with your computer, to connect
a TOSLINK optical cable.
1
Security cable slot — Attaches a commercially available security cable to
the computer.
NOTE: Before you buy a security cable, ensure that it fits into the security
cable slot on your computer.
Microphone connector — Connects to a microphone or inputs signal
for use with audio programs.
8
Network connector — Connects your computer to a network or
2
3
Headphone connectors (2) — Connect to a pair of headphones or to a
powered speaker or sound system.
9
broadband device.
VGA connector — Connects your computer to a monitor or projector.
16
CHAPTER 2: GETTING TO KNOW YOUR LAPTOP
Right View Features
USB 2.0 connectors (2) — Connect to USB devices, such as a mouse,
keyboard, printer, external drive, or MP3 player.
4
1
eSATA/USB combo connector with USB PowerShare — Connects to
eSATA compatible storage devices (such as external hard drives or optical
drives) or USB devices (such as a mouse, keyboard, printer, external drive,
or MP3 player).
5
e USB Powershare feature allows you to charge USB devices when the
computer is powered on/off or in sleep state.
NOTE: Certain USB devices may not charge when the computer is powered
off or in sleep state. In such cases, turn on the computer to charge the
device.
2
3
4
5
6
1
ExpressCard slot — Provides support for additional memory, wired and
NOTE: You can enable or disable the option of charging the USB devices when
wireless communications, multimedia, and security features. e slot
supports 54 mm Express cards.
the computer is powered off or in sleep mode through the BIOS settings.
NOTE: If you turn off your computer while charging a USB device, the device
stops charging. To continue charging, disconnect the USB device and
connect it again.
NOTE: e ExpressCard slot is designed only for ExpressCards. e slot does
NOT support PC Cards.
2
3
Optical drive — Plays or records only standard-size (12 cm) CDs, DVDs, and
Blu‑ray Discs (optional). Ensure that the side with print or writing is facing
upward when inserting discs. For more information, see “Using the Optical
NOTE: e USB PowerShare is automatically shut off when only 10% of the
total battery life remains.
6
HDMI-input connector — Connects to the HDMI‑output connector on
your video device such as a DVD player, camcorder, or gaming device.
9-in-1 Media Card Reader — Provides a fast and convenient way
to view and share digital photos, music, videos, and documents.
NOTE: e HDMI-input connector works only when the computer is on.
CHAPTER 2: GETTING TO KNOW YOUR LAPTOP
17
1
Left digital-array microphone — Combines with the right digital‑array
microphone to provide high quality sound for video chatting and voice
recording.
Display Features
2
Camera activity indicator — Indicates if the camera is on or off. A solid
white light indicates camera activity.
1 2 3
4
5
3
4
Camera — Built‑in camera for video capture, conferencing, and chat.
Right digital-array microphone — Combines with the left digital‑array
microphone to provide high quality sound for video chatting and voice
recording.
5
Display — Your display can vary based on selections you made when
purchasing your computer.
CHAPTER 2: GETTING TO KNOW YOUR LAPTOP
19
Computer Base and Keyboard Features
1
Status lights (3) — Indicate if the Caps Lock, Number Lock, or Scroll Lock
lights are turned on or off.
2
Macro keys — You can assign keystrokes, predefined functions, macros,
or shortcuts for your games using the TactX Macro Key Controls option
available in the Alienware Command Center. For more information, see
7
6
1
3
Backlit keyboard — Illuminates to provide visibility in low lit or dark
environments. You can customize the colors and effects of the backlight
using the AlienFX software available in the Alienware Command Center.
For more information on customizing the backlight, see “Alienware
2
4
Touch pad — Provides the functionality of a mouse to move the cursor,
drag or move selected items, and left‑click by tapping the surface.
5
6
7
Touch pad buttons (2) — Provide left- and right-click functions like those
on a mouse.
Media control keys (9) — Press the keys to perform the associated action.
Power button — Turns the computer on or off when pressed. For more
3
4
5
20
CHAPTER 2: GETTING TO KNOW YOUR LAPTOP
Status Lights
Media Control Keys
e three status lights are located at the top-left side of the keyboard. For the e media control keys are located at the top-right side of the keyboard. For
activate, press the desired keys. e keys will illuminate temporarily to confirm
your selection.
Caps Lock Light
Turns on when the keyboard is in Caps Lock mode. In this mode, all
characters you type are in uppercase.
Decrease volume
Fast Forward or Play next
track
Number Lock Light
Increase volume
Mute the sound
Eject
Turns on when the keyboard is in Num Lock mode. In this mode, the
embedded numeric keypads can be used.
Wireless Control - Switch
wireless communications
on/off
Scroll Lock Light
Rewind or Play previous track
Play or Pause
(for more information, see
“Using the Wireless Control”
Turns on when the scroll lock option is on.
Alienware Command Center
(for more information, see
“Alienware Command Center”
CHAPTER 2: GETTING TO KNOW YOUR LAPTOP
21
Power Button
On AC adapter:
You can program this button to perform actions like shutting down the operating
system or entering the standby mode. For details on how to program this button,
see Power Options in the control panel of Microsoft Windows operating system.
Blue or custom AC‑color
e battery is fully charged.
Blue or custom AC‑color fading
into amber or custom battery‑
color
e computer is turned off or
on and the battery is charging.
e power button is located in the center of the hinge cover. For the exact location,
Blue or custom AC‑color fading
into black
e computer is in standby
mode.
e color of the AlienHead rim indicates the power status. e color indicating
the power status can be changed using the AlienFX software.
On battery:
Amber or custom battery‑color
e battery is fully charged.
Amber or custom battery‑color
fading into black
e computer is in standby
mode.
Blinking Amber or custom
battery‑color
e battery charge is low.
For more details on standby and hibernate mode, see Power Options in the
control panel of your Microsoft Windows operating system.
22
CHAPTER 2: GETTING TO KNOW YOUR LAPTOP
Function Keys
F7 – Switchable Graphics Toggle
Press <Fn><F7> to switch between integrated and discrete graphics
option.
NOTE: Depending on the configuration of the laptop you purchased, some
of the function keys may have no associated tasks.
F8 – External HDMI Input Toggle
Press <Fn><F8> to switch between external HDMI input source.
e <Fn> key is located at the bottom-left corner of the keyboard, and is used
together with other keys to activate certain functions. Hold down the <Fn> key
along with the key described below:
F9 – Camera on/off
Press <Fn><F9> to switch off or switch on the camera.
FI – Suspend Mode
F10 – Microsoft Mobility Center on/off
Press <Fn><F10> to launch or close the Microsoft Mobility Center
application.
Press <Fn><F1> to enable the suspend mode. In the suspend mode,
the display and selected devices will switch off for less energy
consumption.
F2 — Check Battery Status
F11 – AlienFX on/off
Press <Fn><F2> to display the Battery Status Meter.
Press <Fn><F11> to enable or disable the AlienFX illumination.
F3 – Mute on/off
F12 – Touch Pad on/off
Press <Fn><F3> to enable or disable the mute function.
Press <Fn><F12> to enable or disable the touch pad function and
the illumination around the touch pad. When the touch pad function
is switched off, the touch pad can still work temporarily for three to
five seconds while the computer reboots into the Windows operating
system, or resumes from standby or hibernate mode.
F4 – Increase Display Brightness
Press <Fn><F4> to increase the brightness of the display.
F5 – Decrease Display Brightness
Press <Fn><F5> to decrease the brightness of the display.
F6 – Display Mode
Press <Fn><F6> to toggle between the external displays connected.
CHAPTER 2: GETTING TO KNOW YOUR LAPTOP
23
24
CHAPTER 2: GETTING TO KNOW YOUR LAPTOP
Alienware Command Center
Connection
Type
Computer
Cable
Display
e Alienware Command Center gives you access to Alienware’s exclusive
software and is a continuously upgradable control panel. As Alienware releases
new programs, they download directly into the Command Center allowing you
to build a library of system management, optimization, and customization tools.
You can access Alienware Command Center by pressing
VGA‑to‑VGA
(VGA cable)
on the media control
HDMI‑to‑HDMI
(HDMI cable)
Mini‑
Connecting External Displays
DisplayPort-
to-DisplayPort
(Mini‑
If you want to enjoy your computing environment on a bigger scale visually,
or extend your desktop area, you can connect an external display such as a
standalone monitor, an LCD TV, or a projector.
DisplayPort-
to-DisplayPort
adapter +
DisplayPort
Cable)
Connecting a Display
Use the appropriate cable based on the connectors available on your computer
and display. Refer to the following table to identify the connectors on your
computer and display.
Mini‑
DisplayPort-
to‑DVI (Mini‑
DisplayPort-to-
DVI adapter +
DVI cable)
NOTE: When connecting to a single display, connect the display to ONLY
ONE of the connectors on your computer.
NOTE: You can purchase the mini-DisplayPort-to-DisplayPort and
mini-DisplayPort-to-DVI adapters at dell.com.
26
CHAPTER 3: USING YOUR LAPTOP
1. Turn off your laptop.
2. Turn off the display and disconnect it from the power supply.
d. Multiple Displays — Select from the below options:
• Duplicate these displays
3. Connect one end of the display cable to the VGA, mini-DisplayPort, or HDMI
• Extend these displays
• Show desktop on display 1
• Show desktop on display 2
connector on your Alienware laptop.
4. Connect the other end of the cable to the same connector on your display.
5. If necessary, connect one end of the power cable to the display’s power
3. Click Apply to apply your changes and then click OK to exit.
connector.
6. Connect the other end of the power cable to a grounded three‑prong power
strip or wall outlet.
7. Turn on your laptop, and then turn on your display.
Using Removable Media and Cards
Observe the safety measures below:
When no ExpressCard or Media Card (SD/MMC/MS cards) is inserted into the
ExpressCard or Media Card slot, ensure that the blank cards that shipped with
your laptop is inserted in the unused slot(s). e blank cards protect the unused
slots from dust and other particles. When inserting a blank card, ensure that
the correct side is on the top (indicated by an arrow mark on some blank cards).
Inserting a blank card upside down may damage your laptop.
Extending the Desktop
1. With the external display connected, right‑click on the desktop and click
Screen resolution or press <Fn><F1>.
2. Customize the following options:
a. Display — Select the display you would like to manage.
b. Resolution — Select the suitable display resolution.
c. Orientation — Select Potrait or Landscape depending on your
display type.
CHAPTER 3: USING YOUR LAPTOP
27
Using the Optical Drive
Using the Integrated Camera
Your laptop has a slot load optical drive. Depending on the configuration ordered,
your laptop may have one of the following drive types. ese logos are used to
indicate each drive’s capabilities and media compatibility.
Turning the Camera On and Off
Press the key combination <Fn><F9> to switch on or switch off the camera.
After switching on the camera, you need to activate its function through the
Microsoft Windows operating system. In addition, you can also use Windows
Movie Maker to create, edit, and share videos.
DVD±R/W Dual
Layer Writer
DVD±R/W drive can read CD‑ROM, CD‑R, CD‑R/W, DVD,
DVD+R/W, and DVD‑R/W media.
It can also record to CD‑R, CD‑RW, DVD+R/W, DVD‑R/W,
and DVD+R Dual Layer (DL) media.
Using the Wireless Control
You can quickly switch on or switch off the wireless radios (Bluetooth and WLAN)
using the wireless control . Gently pressing this control one time changes the
state of the wireless radios.
Blu‑ray Disc
Reader/Writer
Blu‑ray drive can read CD‑ROM, CD‑R, CD‑R/W, DVD,
DVD+R/W, DVD‑R/W, DVD+R Dual Layer (DL), BD‑ROM,
BD‑R, and BD‑RE media.
It can also record to CD‑R, CD‑R/W, DVD+R/W, DVD‑R/W,
DVD+R Dual Layer (DL), BD‑R, and BD‑RE media.
28
CHAPTER 3: USING YOUR LAPTOP
Battery Pack
Power Management
Your laptop is equipped with a high‑energy rechargeable Lithium‑ion (Li‑ion)
battery pack. Battery life varies depending on your laptop configuration, model,
applications installed, power management settings, and features used. As with all
batteries, the maximum capacity of this battery decreases with time and usage.
Understanding Power Consumption
In order to fully utilize the power of your battery, it would be a good idea for you
to spend some time acquiring a basic understanding of the power management
concept from your operating system.
e battery-meter lights on the battery pack indicate the charge level of the
battery. When you press the battery meter once, the charge level lights illuminate.
Each of the five lights represent approximately 20 percent of the total battery
charge. For example, if four lights turn on, there is approximately 60 percent to
80 percent of battery charge remaining and if no lights turn on, there is no charge
remaining in the battery.
You can use the power options in your operating system to configure the power
settings on your computer. e Microsoft Windows operating system installed on
your computer provides three default options:
•
•
Balanced — Offers full performance when you need it and saves power
1
Battery Meter
during periods of inactivity.
Power Saver — Saves power on your computer by reducing system
performance to maximize the life of the computer and by reducing the
amount of energy consumed by your computer over its lifetime.
1
•
High Performance — Provides the highest level of system performance
on your computer by adapting processor speed to your activity and by
maximizing system performance.
CHAPTER 3: USING YOUR LAPTOP
29
You can also create application profiles for any application on your computer.
is may be required for newly released games or applications that do not have a
default application profile.
Customizing Your Power Settings
1. Click Start → Control Panel.
2. Click All Control Panel Items.
3. Double‑click the Power Options icon.
4. Select a power plan from the options shown. To customize specific settings,
click Change plan settings next to the selected power plan.
Changing the Application Profile Settings
1. Right‑click on the desktop and select NVIDIA Control Panel.
2. In the NVIDIA Control Panel window, click 3D Settings to expand the
selection (if not already expanded) and then click Manage 3D Settings.
Reducing Power Consumption
3. In the Program Settings tab, click Add and browse to select the
application’s executable file (.exe). Once added, you can change the
settings for that application.
Although your laptop (together with the operating system) is capable of
power conservation, there are measures you can take to reduce the power
consumption:
•
Lower the intensity of the display backlight. A very bright screen translates
to higher power usage.
Use the Go Dark option in the Alienware Command Center.
To change the settings for a specific application, locate the application in the
Select a program to customize: list and make the desired changes.
•
NOTE: For more information on the NVIDIA control panel options and
settings, click Help.
Free Fall Sensor
Free fall sensor protects your computer hard drive from possible damage, by
detecting a free fall state caused by accidentally dropping the computer. When a
free fall state is detected, the hard drive is placed in a safe state to protect against
damage to the read/write head and possible data loss. Your hard drive returns to
normal operation, when the free fall state is no longer detected.
30
CHAPTER 3: USING YOUR LAPTOP
Entering System Setup
Configuring the BIOS
1. Turn on (or restart) your laptop.
System Setup
NOTE: Keyboard failure may result when a key on the keyboard is held down
for extended periods of time. To avoid possible keyboard failure, press and
release <F2> in even intervals until the System Setup screen appears.
e System Setup options allow you to:
2. While the laptop is booting, press <F2> immediately before the operating
system logo appears to access the BIOS Setup Utility.
•
Change the system configuration information after you add, change, or
remove any hardware in your laptop.
If an error occurs during POST (Power On Self Test), you may also enter the
BIOS Setup Utility by pressing <F2> when prompted.
•
•
Set or change a user‑selectable option.
View the installed amount of memory or set the type of hard drive installed.
NOTE: If you wait too long and the operating system logo appears, continue
to wait until you see the Microsoft® Windows® desktop, then shut down
your laptop and try again.
Before you use System Setup, it is recommended that you write down the current
System Setup information for future reference.
CAUTION: Do not change the settings in System Setup unless you are
an expert computer user. Certain changes can cause your computer to
work incorrectly.
System Setup Screens
e BIOS Setup Utility window displays current or changeable configuration
information for your laptop. Information is divided into five menus: Main,
Advanced, Security, Boot, and Exit.
Key functions appear at the bottom of the BIOS Setup Utility window and lists
keys and their functions within the active field.
CHAPTER 3: USING YOUR LAPTOP
31
System Setup Options
Main Menu
CPU Frequency
CPU L3 Cache
Displays the speed of the processor.
Displays the processor cache size.
Displays the ID of the processor.
Displays the integrated graphics.
NOTE: Depending on your computer and installed devices, the items listed
in this section may not appear, or may not appear exactly as listed.
NOTE:Fortheupdatedsystemsetupinformation, seetheServiceManualat CPUID
support.dell.com/manuals.
Integrated
Graphics
Main Menu
Discrete
Displays the primary discrete graphics.
Displays the secondary discrete graphics.
Graphics 1
System Time
(hh:mm:ss)
Displays the system time.
Displays the system date.
Discrete
Graphics 2
System Date
(mm/dd/yyyy)
Total Memory
Memory Bank 0
Memory Bank 1
Displays the total memory available in your computer.
Displays the memory size installed in DIMM 0.
Displays the memory size installed in DIMM 1.
Alienware
Service Tag
BIOS Version
EC Version
ME Version
CPU
Displays the model number of your computer.
Displays the service tag of your computer.
Displays the BIOS version.
Memory Bank 2
Memory Bank 3
Displays the memory size installed in DIMM 2.
Displays the memory size installed in DIMM 3.
Displays the EC firmware version.
Displays the Intel ME firmware version.
Displays the type of processor installed.
32
CHAPTER 3: USING YOUR LAPTOP
Advanced Menu
Advanced Menu
Intel SpeedStep
USB Power Share
Allows you to enable or disable the Intel SpeedStep
technology. Disabling this feature may improve
performance, but will greatly reduce battery life.
Allows you to charge USB devices when the computer is
turned off or in standby mode.
•
AC Only: Charge USB devices when connected to AC
adapter only.
Virtualization
USB Emulation
Allows you to enable or disable the Intel Virtualization
technology.
•
AC and Battery: Charge USB devices when
connected to AC adapter and when the computer is
running on battery.
Allows you to enable or disable the USB emulation
feature. is feature defines how the BIOS, in the
absence of a USB‑aware operating system, handles USB
devices. USB emulation is always enabled during POST.
•
Disabled: Disables USB PowerShare.
Integrated
Network
Allows you to enable or disable the on‑board LAN
controller.
NOTE: You cannot boot from any type of USB device
(floppy, hard drive, or memory key) when this option
is disabled.
•
Disabled: Internal LAN is disabled and is not visible
to the operating system.
•
Enabled: Internal LAN is enabled.
USB Wake
Support
Allows you to enable USB devices to wake the computer
from standby or to disable the USB wake support
feature.
High Definition
Audio
Allows you to enable or disable the internal high
definition audio device.
•
Disabled: e internal audio device is disabled and
NOTE: If USB Powershare is enabled, a device
connected to the USB Powershare connector may not
wake the computer.
is not visible to the operating system.
•
Enabled: e internal audio device is enabled.
SD-Card Reader
CPU Turbo Mode
Allows you to enable or disable the internal SD card
reader.
Allows you to enable or disable the Intel CPU turbo
mode performance option.
CHAPTER 3: USING YOUR LAPTOP
33
Advanced Menu
Advanced Menu – Performance Options
Performance
Options
Overclocking
Feature
Allows you to configure fields in the Performance
Options sub‑menu (for more information, see
Allows you to enable or disable the global overclocking
feature.
•
•
Disabled: e overclocking feature is disabled.
Enabled: Displays additional overclocking options.
SATA Operation
Allows you to configure the operating mode of the
integrated SATA hard drive controller.
Non-Turbo
Flex Support
Allows you to modify the CPU flex ratio with Turbo Mode
disabled.
•
•
AHCI: SATA is configured for AHCI mode.
RAID: SATA is configured for RAID mode.
Flex Ratio
Override
Appears when Non‑Turbo Flex is enabled and allows
you to specify the flex ratio for all CPU cores.
SATA HARD
DRIVE 1
Displays the installed primary SATA hard drive model.
Extreme Edition
Allows Extreme Edition CPUs to adjust the flex ratio in
a Turbo Mode environment that allows each individual
core ratio to be modified.
SATA HARD
DRIVE 2
Displays the installed secondary SATA hard drive
model.
Adapter
Warnings
Allows you to choose if the computer should display
warning messages when you use AC adapters that are
not supported by your computer.
Extreme Edition
Core Ratio
Limits
Allows you to modify the flex ratio of individual cores
physically present in the CPU.
•
Disabled: BIOS will not detect unsupported AC
adapters and will not display any message to
screen.
Enabled : BIOS will detect unsupported AC adapters
and display an error to screen.
Memory Override
Support
Allows you to enable or disable the memory override
option support.
•
•
Disabled: e memory override support is disabled.
Enabled: Displays additional memory override
support options.
•
Charger
Behavior
Allows you to enable or disable battery charging.
Memory
Voltage
Allows you to modify memory voltage.
Primary Display
Allows you to choose a primary display.
Memory
Frequency
Allows you to modify memory frequency.
34
CHAPTER 3: USING YOUR LAPTOP
Advanced Menu – Performance Options
Wireless Menu
DIMM Profile
(XMP)
Bluetooth
Allows you to select different XMP options.
Allows you to enable or disable the internal Bluetooth
device.
Override Turbo
Settings
•
Disabled: e internal Bluetooth device is disabled
and is not visible to the operating system.
Allows you to override CPU Turbo Mode settings.
•
Enabled: e internal Bluetooth device is enabled.
Long Duration
PWR Limit
Allows you to specify the Turbo Mode power limit 1
in Watts.
Wireless
Network
Allows you to enable or disable the internal wireless
device.
•
e value may vary from 0 to the fused value. A value
of 0 programs this value to the fused limit. You cannot
specify a value greater than the fused limit.
Disabled: e internal wireless device is disabled
and is not visible to the operating system.
Enabled: e internal wireless device is enabled.
•
Long Duration
Time Window
Power Limit 1 time value in seconds.
DMC
Allows you to enable or disable the internal DMC device.
Indicates the time window over which TDP value should
be maintained. A value of 0 programs this value to the
fused limit.
Wireless
Switch/Hotkey
Allows you to choose which wireless devices are
controlled by the wireless switch/hotkey.
Short Duration
PWR Limit
Allows you to enable or disable the Short Duration Power
Security Menu
Limit.
Supervisor
Password
Displays if the supervisor password is clear or set.
Displays if the user password is clear or set.
Short
Duration
PWR Limit
Turbo Mode Power Limit 2 value in Watts.
User Password
A value of 0 programs this value to 1.25 x TDP.
CHAPTER 3: USING YOUR LAPTOP
35
Security Menu
Exit Menu
Set Service Tag
Exit Saving
Changes
Displays the service tag of the computer when the
service tag is present.
Allows you to exit System Setup and save your changes
to CMOS.
Save Change
Without Exit
Allows you remain in System Setup and save your
changes to CMOS.
Displays a field to input the service tag manually when
the service tag is absent.
Exit Discarding
Changes
Allows you to exit System Setup and load previous values
from CMOS for all Setup items.
Set Supervisor
Password
Allows you to set the supervisor password. e
supervisor password controls access to the system
setup utility.
Load Optimal
Defaults
Allows you to load default values for all Setup items.
Set User
Password
Allows you to set the user password. e user password
controls access to the computer at boot.
Discard Changes
Allows you to load previous values from CMOS for all
Setup items.
Computrace
Allows you to enable or disable Computrace security
feature.
Boot Menu
Use the up or down arrow keys to change the boot device priority. You can
choose from:
• Hard Drive
• USB Storage
• CD/DVD/BD
• Removal Devices
• Network
36
CHAPTER 3: USING YOUR LAPTOP
Turning Off Your Computer
Before You Begin
CAUTION: To avoid losing data, save and close all open files and exit all
open programs before you turn off your laptop.
is section provides procedures for removing and installing the components in
your laptop. Unless otherwise noted, each procedure assumes that the following
conditions exist:
1. Save and close all open files and exit all open programs.
•
You have performed the steps in “Turning Off Your Computer” and “Before
Working Inside Your Computer” in this section.
2. Click Start → Shut Down.
e laptop turns off after the operating system shutdown process finishes.
•
•
You have read the safety information that shipped with your computer.
A component can be replaced or—if purchased separately—installed by
performing the removal procedure in reverse order.
3. Ensure that the computer is turned off. If your computer did not
automatically turn off when you shut down your operating system, press
and hold the power button until the computer turns off.
38
CHAPTER 4: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS
CAUTION: To avoid damaging the computer, perform the following steps
before you begin working inside the computer.
Before Working Inside Your Computer
Use the following safety guidelines to help protect your computer from potential
damage and to help to ensure your own personal safety.
1. Ensure that the work surface is flat and clean to prevent the computer cover
from being scratched.
WARNING: Before working inside your laptop, read the safety
information that shipped with your computer. For additional safety
best practices information, see the Regulatory Compliance Homepage
at dell.com/regulatory_compliance.
CAUTION: To disconnect a network cable, first unplug the cable from
your computer and then unplug the cable from the network device.
CAUTION: Handle components and cards with care. Do not touch the
components or contacts on a card. Hold a card by its edges. Hold a
component such as a processor by its edges, not by its pins.
3. Disconnect all telephone or network cables from the laptop.
4. Press and eject any installed cards from the ExpressCard slot and the Media
Card slot.
CAUTION: Only a certified service technician should perform repairs on
your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
5. Disconnect your computer and all attached devices from their electrical
outlets.
CAUTION: To help prevent damage to the system board, you must remove
the battery from the battery bay before you service the laptop.
6. Remove the battery from the battery bay (see “Replacing the Battery Pack”
CAUTION: To avoid electrostatic discharge, ground yourself by using a
wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on the back of the computer).
CAUTION: When you disconnect a cable, pull on its connector or on its
pull-tab,notonthecableitself.Somecableshaveconnectorswithlocking
tabs; if you are disconnecting this type of cable, press in on the locking
tabs before you disconnect the cable. As you pull connectors apart, keep
them evenly aligned to avoid bending any connector pins. Also, before
you connect a cable, ensure that both connectors are correctly oriented
and aligned.
7. Press the power button to ground the system board.
CHAPTER 4: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS
39
Replacing the Battery Pack
is battery pack can easily be removed and replaced. Ensure that the laptop is
properly shut down before changing the battery pack.
CAUTION: To avoid damage to the laptop, use only the battery designed
for this particular Alienware laptop. Do not use batteries designed for
other Alienware or Dell laptops.
To remove the battery pack:
2. Shut down the laptop and turn it over.
3. Slide the battery latch to the unlock position as shown.
e battery pack pops up.
4. Remove the battery pack.
1
To replace the battery pack, perform the removal steps in reverse order.
2
1
battery pack
2
battery latch
40
CHAPTER 4: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS
Removing the Memory Module(s)
Upgrading or Replacing Memory
NOTE: Your computer supports up to four memory module connectors.
You can access connectors DIMM A and DIMM B by removing the
compartment door at the bottom of your computer. To upgrade memory
module(s) in connectors DIMM C and DIMM D, see the Service Manual at
support.dell.com/manuals.
Your laptop is equipped with a configurable memory unit. e industry standard
JEDEC PC3-12800 (DDR3-1600) SODIMM memory module connectors are
available for memory upgrade.
NOTE: If you purchased a dual‑core processor, your computer supports
only memory module connectors DIMM A and DIMM B.
NOTE: e table below illustrates one possible way the system memory
can be configured. You can also configure the system memory by
installing memory modules in connectors DIMM C and DIMM D.
3. Remove the four screws that secure the compartment door to the
computer base.
4. Slide the compartment door towards the rear of the computer, lift it up,
and then remove it from the computer.
Memory
connector
DIMM A
Memory
connector
DIMM B
Memory
connector
DIMM C
Memory
connector
DIMM D
Total
memory
2 GB
2 GB
4 GB
8 GB
8 GB
2 GB
4 GB
4 GB
8 GB
8 GB
—
—
—
—
4 GB
6 GB
—
—
8 GB
—
—
16 GB
32 GB
8 GB
8 GB
CHAPTER 4: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS
41
5
4
3
1
2
1
memory module
spring locks (2)
tab
4
notch
memory-module connector
1
2
3
5
2
To replace the memory modules, perform the removal steps in reverse order.
While inserting the memory module into the connector align the notch on the
memory module with the tab on the memory module connector.
1
screws (4)
2
compartment door
5. Use your fingertips to carefully spread apart the memory-module
NOTE: If you need to install memory modules in two connectors, install
a memory module in the lower connector before you install a memory
module in the upper connector.
connector’s spring locks until the memory module pops up.
6. Remove the memory module.
NOTE: If the memory module is not installed properly, the computer may
not boot.
42
CHAPTER 4: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS
Upgrading or Replacing the Hard Drive(s)
Your laptop is equipped with two hard drives.
Removing the Hard Drive(s)
3. Remove the four screws that secure the compartment door to the
computer base.
4. Slide the compartment door towards the rear of the computer, lift it up,
and remove it from the computer.
1
2
1
screws (4)
2
compartment door
CHAPTER 4: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS
43
5. Release the connector latch and disconnect the hard‑drive cable from the
8. Disconnect the interposer from the hard drives.
connector on the system board.
6. Loosen the four captive screws that secure the hard‑drive assembly.
7. Using the pull tab, lift the hard‑drive assembly out of the computer base.
4
3
1
2
3
4
1
2
1
primary hard drive (HDD0)
hard-drive bracket
3
4
secondary hard drive (HDD1)
interposer
2
1
hard-drive assembly
captive screws (4)
3
4
connector latch
hard-drive cable
2
44
CHAPTER 4: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS
9. Remove the four screws that secure the primary hard drive (HDD0) and lift
the hard drive out of the hard‑drive bracket.
10. Remove the four screws that secure the secondary hard drive (HDD1) and
slide the hard drive out of the hard‑drive bracket.
3
2
1
1
screws (8)
3
secondary hard drive (HDD1)
2
primary hard drive (HDD0)
To replace the hard drive(s), perform the removal steps in reverse order.
CHAPTER 4: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS
45
46
CHAPTER 4: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS
Basic Hints and Tips
Backup and General Maintenance
•
Computer does not power on: Is your AC adapter cable securely connected
to a working electrical outlet? If connected to a power strip, ensure that the
strip is actually working.
Connections: Check all the cables to ensure that there are no loose
connections anywhere.
Power Savings: Ensure that your computer is not in hibernate or standby
mode by pressing the power button for less than 4 seconds. e power
status light will fade from blue to black while in standby mode; in hibernate
mode it will be off.
Brightness: Check and adjust the brightness of the display by pressing the
key combinations <Fn><F4> or <Fn><F5>.
Display Choice: Press the key combination <Fn><F6> to ensure that the
computer is not set to “External Only” display.
•
Always back up your important data on a regular basis and keep copies of
your operating system and software safe. Do not forget to note the serial
numbers if you are storing them outside of their original cases ‑ for example,
in a CD wallet.
Run maintenance programs as often as you can. You may schedule these
programs to run at times when you are not using your computer. You can
use those provided with your operating system, or buy more powerful,
dedicated programs to do so.
•
•
•
•
•
Write down your passwords and keep them safe (away from your computer).
is is especially important if you choose to password-protect your
computer’s BIOS and operating system.
•
•
•
Document vital settings such as network, dialup, mail and Internet settings.
Use only the AC adapter that shipped with your laptop.
48
CHAPTER 5: TROUBLESHOOTING
When troubleshooting your computer, remember the following safety guidelines:
Software Diagnostic Tools
Enhanced Pre-Boot System Assessment
•
Before touching any of the computer’s internal components, touch an
unpainted portion of the chassis. Doing so will safely discharge any static
electricity, which could damage your computer.
e computer runs the Enhanced Pre-boot System Assessment (ePSA), a series
of initial tests of your system board, keyboard, display, memory, hard drive, and
so on.
•
•
Turn off your computer and any connected peripherals.
Disconnect any peripherals from your computer.
To invoke ePSA:
ings to check:
1. Turn on (or restart) your computer.
2. When the Alienware logo appears, press <F12> immediately.
•
Ensure that the AC adapter cable is properly connected between your
computer and a grounded, three‑prong power outlet. Ensure that the power
outlet is working.
NOTE: If you wait too long and the operating system logo appears, continue
to wait until you see the Microsoft Windows desktop; then, shut down your
computer and try again.
•
•
Ensure the UPS or power strip is turned on (if applicable).
If your peripheral devices (for example keyboard, mouse, printer, and so on)
are not working, ensure that all connections are secure.
3. Select Diagnostics from the menu and press <Enter>.
4. Follow the instructions on the screen. If a failure is detected, the diagnostics
stop and the computer beeps.
•
•
•
If any computer components were added or removed before the problem
began, check to see if you performed the installation or removal procedures
properly.
If an error message appears on the screen, write down the exact error
message prior to calling Alienware Technical Support to aid in diagnosing
and resolving your issue.
•
•
•
To stop the assessment and restart the computer, press <n>.
To continue to the next test, press <y>.
To retest the component that failed, press <r>.
If an error occurs in a specific program, see the program’s documentation.
CHAPTER 5: TROUBLESHOOTING
49
If failures are detected during ePSA, write down the error code(s) and contact
Answers to Common Problems
If the ePSA completes successfully, the following message appears “Do you
want to run the remaining memory tests? This will take about
30 minutes or more. Do you want to continue? (Recommended).”
Computer Startup Problems
The computer fails the POST
If you are experiencing memory issues, press <y>, else press <n>. e following
message appears: “Enhanced Pre-boot System Assessment complete.”
e Power On Self Test (POST) ensures that the computer meets all the necessary
system requirements and that all hardware is working properly before starting
the remainder of the boot process. If the computer passes the POST, the computer
will continue to start normally. However, if the computer fails the POST, the
computer will generate a single beep to indicate a general failure and an error
message will be displayed. For assistance, contact Alienware Technical Support
Press <o> to reboot your computer.
The computer stops responding or a solid blue screen appears
CAUTION: You might lose data if you are unable to perform an operating
system shutdown.
If you are unable to get a response by pressing a key on your keyboard or moving
your mouse, press and hold the power button for at least 6 seconds to turn off,
your computer, and then restart it.
NOTE: e chkdsk program may run when you restart the computer.
Follow the instructions on the screen.
50
CHAPTER 5: TROUBLESHOOTING
Other software problems
Software Problems
Back up your files immediately.
A program stops responding or crashes repeatedly
End the program:
Use a virus-scanning program to check the hard drive, or CDs.
Save and close any open files or programs and shut down your computer
through the Start menu.
1. Press <Ctrl><Shift><Esc> simultaneously.
2. Click the Applications tab and select the program that is no longer
responding.
Scan the computer for spyware:
3. Click End Task.
If you are experiencing slow computer performance, you frequently receive pop‑
up advertisements, or you are having problems connecting to the Internet,
your computer might be infected with spyware. Use an anti‑virus program that
includes anti‑spyware protection (your program may require an upgrade) to scan
the computer and remove spyware.
Check the software documentation.
If necessary, uninstall and then reinstall the program.
A program is designed for an earlier version of Microsoft Windows
Run the ePSA diagnostics:
Run the Program Compatibility Wizard:
If all tests run successfully, the error condition is related to a software problem.
e Program Compatibility Wizard configures a program so that it runs in an
environment similar to an earlier version of Microsoft Windows operating system
environments.
1. Click Start → Control Panel→ Programs→ Programs and Features→
Use an older program with this version of Windows.
2. In the welcome screen, click Next.
3. Follow the instructions on the screen.
CHAPTER 5: TROUBLESHOOTING
51
Check the software documentation or contact the software manufacturer for
troubleshooting information:
Hard Drive Problems
Allow the computer to cool before turning it on
•
•
Ensure that the program is compatible with the operating system installed
on your computer.
Ensure that your computer meets the minimum hardware requirements
needed to run the software. See the software documentation for
information.
Ensure that the program is installed and configured properly.
Verify that the device drivers do not conflict with the program.
If necessary, uninstall and then reinstall the program.
A hot hard drive may prevent the operating system from starting. Try allowing
the computer to return to room temperature before turning it on.
Run Check Disk
•
•
•
1. Click Start → Computer.
2. Right‑click Local Disk C:.
3. Click Properties→ Tools→ Check Now.
If the User Account Control window appears, click Continue.
4. Follow the instructions on the screen.
52
CHAPTER 5: TROUBLESHOOTING
Memory Problems
Power Problems
When you press the power button, the computer does not turn on
Memory errors detected on startup
•
Check memory modules for correct seating and orientation. Reseat the
memory modules if applicable (see “Upgrading or Replacing Memory” on
Computers using a dual-channel memory configuration require that
memory modules be installed in pairs. If you require assistance, contact
Alienware Technical Support (for more information, see “Contacting
•
•
•
If the AC adapter cable is connected to a surge protector or UPS, ensure that
the surge protector or UPS is securely connected to an electrical outlet, is
switched on and is working correctly.
Check that the wall outlet is working properly by testing another device
such as a radio or lamp that you know works. If the wall outlet is not working,
contact an electrician or your power company for further assistance.
•
If the problem persists, contact Alienware support (see “Contacting
Display Problems
If the display is blank
NOTE: If you are using a program that requires a higher resolution than
your computer supports, it is recommended that you attach an external
monitor to your computer.
e computer may be in a power saving mode:
Press a key on the keyboard or press the power button to resume normal
operation.
Switch the video image:
If your computer is attached to an external monitor, press <Fn><F6> to switch
the video image to the display.
CHAPTER 5: TROUBLESHOOTING
53
54
CHAPTER 5: TROUBLESHOOTING
AlienRespawn Basic
AlienRespawn
To restore the factory image while preserving the data files:
1. Turn off your computer.
2. Disconnect all the devices connected to the computer (such as USB drive,
printer, and so on) and remove any recently added internal hardware.
CAUTION: Using AlienRespawn permanently removes any programs
or drivers installed after you received your computer. Create backup
media of applications you need to install on your computer before using
AlienRespawn. Use AlienRespawn only if System Restore did not resolve
your operating system problem.
NOTE: Do not disconnect the AC adapter cable.
CAUTION: Although AlienRespawn is designed to preserve the data files
on your computer, it is recommended that you backup your data files
before using AlienRespawn.
3. Turn on your computer.
You can use AlienRespawn to restore your hard drive to the operating state it was 4. When the Alienware logo appears, press <F8> several times to access the
in when you purchased your computer, while preserving the data files.
Advanced Boot Options window.
AlienRespawn allows you to backup and restore your computer to an earlier
operating state.
NOTE: If you wait too long and the operating system logo appears, continue
to wait until you see the Microsoft Windows desktop; then, shut down your
computer and try again.
5. Select Repair Your Computer.
6. Select AlienRespawn and Emergency Backup from the System Recovery
Options menu and follow the instructions on the screen.
NOTE: e restoration process may take an hour or more depending on
the size of the data to be restored.
NOTE: For more information on AlienRespawn, see knowledge base article
353560 at support.dell.com.
56
CHAPTER 6: SYSTEM RECOVERY
Upgrading to AlienRespawn Professional
Dell DataSafe Online Backup (Optional)
AlienRespawn provides additional features that allow you to:
NOTE: Dell DataSafe Online is supported only on Windows operating
systems.
•
•
•
Backup and restore your computer based on file types
Backup files to a local storage device
Schedule automated backups
NOTE: A broadband connection is recommended for fast upload or
download speeds.
To upgrade to AlienRespawn Professional:
1. Double‑click the AlienRespawn icon
desktop.
Dell DataSafe Online is an automated backup and recovery service that helps
protect your data and other important files from catastrophic incidents like theft,
fire, or natural disasters. You can access the service on your computer using a
password‑protected account.
in the notification area of your
2. Click Upgrade Now!
3. Follow the instructions on the screen.
For more information, go to delldatasafe.com.
To schedule backups:
1. Double‑click the Dell DataSafe Online icon on the taskbar.
2. Follow the instructions that appear on the screen.
CHAPTER 6: SYSTEM RECOVERY
57
My Dell Downloads
NOTE: My Dell Downloads may not be available in all regions.
Some of the software pre‑installed on your new Alienware computer do not
include a backup media. is software is available on the My Dell Downloads
website. From this website, you can download available software for reinstallation
or create your own backup media.
To register and use My Dell Downloads:
1. Go to DownloadStore.dell.com/media.
2. Follow the instructions on the screen to register and download the software.
3. Reinstall the software or create a backup media for future use.
58
CHAPTER 6: SYSTEM RECOVERY
Computer Model
Computer Information
Alienware M18x
Processor
•
•
Intel Core i7 Extreme Edition
(second generation)
Intel Core i7 and i5 (second generation)
Dimensions
Height
Front
L2 cache
256 KB
L3 cache
up to 8 MB
53.0 mm (2.09 inches)
54.20 mm (2.13 inches)
436.0 mm (17.17 inches)
322.0 mm (12.68 inches)
5.41 kg (11.93 lb)
Bus clock
100 MHz
Back
System chipset
SDRAM bus width
Mobile Intel HM67 Express Chipset
Width
one or two 64‑bit channels of DDR3 memory up
to 1600 MHz
Depth
Weight with 12‑cell
battery and optical drive
(starting at)
Processor address bus
width
32 bits
NOTE: e weight of your laptop varies
depending on the configuration ordered and
the manufacturing variability.
Processor data width
BIOS SPI Flash Memory
Graphics bus
64 bits
32 Mbit
PCIe x16 Gen2
60
CHAPTER 7: SPECIFICATIONS
Memory
Ports and Connectors
Connectors
four internally accessible DDR3 using JEDEC
SODIMM sockets
Audio
•
•
two stereo headphones/speakers connector
one microphone‑in connector
Capacities
2 GB, 4 GB, and 8 GB
S/PDIF
one headphone/S/PDIF combo connector
one 9-in-1 slot
Memory type
•
up to 1600 MHz unbuffered non-ECC
dual-channel DDR3 configuration
Media Card Reader
ExpressCard
one ExpressCard/54 connector
•
Extreme Memory Profiles (XMP) 1600
and 1866
Communications
Memory configurations
possible
4 GB, 6 GB, 8 GB, 16 GB, and 32 GB
Network adapter
10/100/1000 Mbps Ethernet LAN on
system board
Wireless
•
•
one half Mini‑Card slot
Bluetooth; Wireless Display (optional);
WirelessHD (optional)
Ports and Connectors
Network adapter
USB
one RJ45 connector
•
•
two 4-pin USB 2.0 compliant connectors
two 4-pin USB 3.0 compliant connectors
Video
Video controller
Integrated
Discrete
eSATA/USB combo
one 7-pin/4-pin eSATA/USB 2.0-compliant
combo connector with PowerShare
Intel HD Graphics 3000
HDMI input and output
Mini-DisplayPort
VGA
one 19-pin connector
one 20-pin connector
one 15-hole connector
•
•
NVIDIA GeForce GTX 460M
AMD Radeon HD 6970M
CHAPTER 7: SPECIFICATIONS
61
Video
Audio
Video memory
Output power
Integrated
512 MB dedicated video memory
(for total system memory greater than 4 GB)
up to 5 W average per channel; up to 2.5 W
average total power
Speaker
Discrete
•
•
1.5 GB GDDR5 for NVIDIA GeForce GTX 460M
2.0 GB GDDR5 for AMD Radeon HD 6970M
up to 10 W average per channel; up to 5 W
average total power
Subwoofer
External display support
HDMI, Mini DisplayPort, VGA, WiDi (optional),
and WirelessHD (optional)
Internal microphone
support
dual digital microphone in camera assembly
Volume controls
program menus and keyboard media function
keys
Audio
Type
2.1 channel internal speaker and subwoofer
Hard-Drive Storage
Number of storage drives
Hard drive
two
Controller
Speaker
IDT 92HD73C codec
•
one 2.5 inch SATA 2.0 (3Gb/s) or SATA 3.0
(6Gb/s) hard drives
dual 4‑ohms speakers in both the left and right
speaker assembly
•
one solid‑state drive
Subwoofer
mono 4‑ohms subwoofer
Internal speaker amplifier MAXIM MAX9736A
15W stereo/ 30W mono
62
CHAPTER 7: SPECIFICATIONS
Media Card Reader
Display
Type
18.4 inch FHD WLED TrueLife
Cards supported
•
•
•
Secure Digital (SD) memory card
Secure Digital Input/Output (SDIO) card
Secure Digital Extended Capacity (SDXC)
card
MultiMedia Card (MMC)
MultiMedia Card plus (MMC+)
Memory Stick
Memory Stick PRO
xD-Picture Card (type - M and type - H)
Hi Density‑SD (SDHD)
Maximum resolution
Dimensions (active area)
Height
1920 x 1080
230.04 mm (9.06 inches)
408.96 mm (16.10 inches)
469.22 mm (18.47 inches)
60 Hz
•
•
•
•
•
•
•
Width
Diagonal
Refresh rate
Operating angle
Pixel pitch
0° (closed) to 135°
0.2550 mm
Hi Capacity‑SD (SDHC)
Controls
brightness can be controlled through
keyboard shortcuts
Keyboard (Backlit)
Number of keys
•
•
•
82 (Korea, U.S., and Canada)
83 (Europe)
86 (Japan)
Backlight color
RGB; colors can be changed by invoking the
AlienFX application in the Alienware Command
Center. For more information, see “Alienware
CHAPTER 7: SPECIFICATIONS
63
Touch Pad
Battery
X/Y position resolution
(graphics table mode)
240 cpi
Operating time
battery operating time varies depending on
operating conditions and can be significantly
reduced under certain power‑intensive
conditions.
Size
Height
Width
56.00 mm (2.20 inches) sensor-active area
99.5 mm (3.92 inches) rectangle
Life span (approximate)
Temperature range
Operating
300 discharge/charge cycles
0° to 50°C (32° to 122°F)
–20° to 60°C (–4° to 140°F)
CR-2032
Camera
Storage
Camera resolution
Video resolution
Diagonal viewing angle
3.0 megapixel
2048 x 1536
60°
Coin‑cell battery
AC Adapter
Type
240 W/330 W
100-240 VAC
Battery
Input voltage
Input current (maximum)
240 W
12-cell “smart” lithium ion (96 Whr)
Height
Width
Depth
Weight
30.2 mm (1.19 inches)
3.50 A
174.0 mm (6.85 inches)
133.3 mm (5.25 inches)
0.65 kg maximum (1.43 lb)
330 W
4.40 A
Input frequency
50 Hz-60 Hz
Voltage
12 VDC ‑ 16.8 VDC
64
CHAPTER 7: SPECIFICATIONS
AC Adapter
Computer Environment
Temperature range
Operating
Output current
0 °C to 35 °C (32 °F to 95 °F)
240 W
330 W
12.30 A (continuous)
16.92 A
Storage
–40 °C to 65 °C (–40 °F to 149 °F)
Relative humidity (maximum)
Operating
Output power
240 W
10% to 90% (non-condensing)
10% to 95% (non-condensing)
240 W
Storage
330 W
330 W
Maximum vibration (Using a random vibration spectrum that simulates user
environment)
Rated output voltage
Temperature range
Operating
19.50 VDC
Operating
Storage
0.66 GRMS
1.3 GRMS
240 W
0 °C to 40 °C (32 °F to 104 °F)
10 °C to 35 °C (50 °F to 95 °F)
–40 °C to 70 °C (–40 °F to 158 °F)
Maximum shock (Measured with hard drive in operating status and a 2‑ms
half‑sine pulse for operating. Also measured with hard drive in head‑parked
position and a 2‑ms half‑sine pulse for storage)
330 W
Storage
Operating
Storage
110 G
160 G
Connector types
DC connector
AC connector
3-pin, 7.4 mm plug
Altitude (maximum)
Operating
3-pin — C13 (150 W)
3-pin — C13 (240 W)
–15.2 m to 3048 m (–50 ft to 10,000 ft)
–15.2 m to 10,668 m (–50 ft to 35,000 ft)
Storage
Airborne contaminant level G1 as defined by ISA–71.04–1985
CHAPTER 7: SPECIFICATIONS
65
66
CHAPTER 7: SPECIFICATIONS
Computer Use
•
GENERAL AND ELECTRICAL SAFETY PRECAUTIONS
Route the power cable and all cables away from where people might walk or
trip over them. Do not allow anything to rest on the power cable.
Computer Setup
•
•
•
Do not spill anything on or into your computer.
To avoid electrical shock, always disconnect all power, modem and any other
cables from the wall outlets before handling the computer.
Read all instructions marked on the product and in the documentation
before operating your computer.
•
•
•
•
Retain all safety and operating instructions.
Never use this product near water or a heat source.
Only set‑up the computer on a stable work surface.
Only operate the computer using the power source type indicated on the
rating label.
Electrostatic Discharge (ESD) Warning
Electrostatic Discharge (ESD) can cause damage to internal system components
if precautions are not taken. ESD is caused by static electricity and the damage
caused is usually permanent.
•
Never block or cover any openings or fans in the computer case. ese are
required for ventilation.
Computer technicians wear a special wrist‑strap that grounds them to the
computer’s case to prevent ESD damage. You can reduce the chances of ESD
damage by doing the following:
•
•
•
Never insert objects of any kind into the ventilation openings.
Ensure that your computer is properly grounded when in use.
Do not attempt to connect your computer into an outlet that is not properly
grounded.
•
Turn off your computer’s power and wait several minutes before starting to
work.
•
If an extension cord is used with your computer, ensure that the total
ampere rating on the computer does not exceed the maximum rating on the
extension cord.
•
•
•
Ground yourself by touching the case of the computer.
Touch only those items which must be replaced.
Avoid walking around while replacing items inside the case, especially if you
are on a carpet or during low temperature and low humidity.
•
If you have to remove peripheral cards for any reason, place them on the
portion of the computer’s case that was removed. Do not touch the edge
connectors at the bottom of the card that connect to the system board.
68
APPENDIX
General Safety Precautions
•
Mechanical Shock: Your computer should never be subjected to severe
mechanical shocks. Careless handling of your computer may cause damage.
Mechanical Shock is not covered by the warranty.
•
Electrical Shock: If you do not open up your computer, there is nothing to
worry about. Your computer protects itself against most irregularities in the
power source.
When You Should Contact Alienware
•
•
•
•
e battery, power cable or connector is damaged.
Your computer has had liquid spilled into it.
Your computer was dropped or the case was damaged.
Normal operation of the computer does not occur when the operating
instructions are followed.
Replacement Components or Accessories
It is only advised to use replacement parts or accessories recommended by
Alienware.
APPENDIX
69
Websites
You can learn about Alienware products and services on the following websites:
CONTACTING ALIENWARE
NOTE: If you do not have an active Internet connection, you can find
contact information on your purchase invoice, packing slip, bill, or Dell
product catalog.
•
•
•
•
•
•
dell.com
dell.com/ap (Asian/Pacific countries only)
dell.com/jp (Japan only)
euro.dell.com (Europe only)
dell.com/la (Latin American and Caribbean countries)
dell.ca (Canada only)
Dell provides several online and telephone‑based support and service options.
Because availability varies by country and product, some services may not be
available in your area.
To contact Dell for sales, technical support, or customer service issues:
1. Visit dell.com/contactdell.
2. Select your country or region.
You can access Alienware Support through the following websites:
•
•
•
•
support.dell.com
3. Select the appropriate service or support link based on your need.
4. Choose the method of contacting Dell that is convenient for you.
support.jp.dell.com (Japan only)
support.euro.dell.com (Europe only)
support.la.dell.com (Argentina, Brazil, Chile, Mexico)
70
APPENDIX
Information for NOM, or Official Mexican Standard
(Only for Mexico)
e following information is provided in the device(s) described in this document in accordance with the requirements of the Official Mexican Standard (NOM):
Importer:
Dell México S.A. de C.V.
Paseo de la Reforma 2620 - Flat 11°
Col. Lomas Altas
11950 México, D.F.
Regulatory
Model
Number
Voltage
Frequency
Electricity Consumption
Output Voltage Output Intensity
19.50 VDC 12.30 A/16.92 A
P12E
100-240 VAC
50–60 Hz
3.50 A/4.40 A
For details, read the safety information that shipped with your computer.
For additional safety best practices information, see dell.com/regulatory_compliance.
APPENDIX
71
Printed in China.
0P38V4A00
|