REPERTOIRE™
PEDESTAL SINK
VITREOUS CHINA
REPERTOIRE™ PEDESTAL SINK
• Traditional-styled basin with backsplash and
matching pedestal
• Made from vitreous china
• Rear overflow
• Supplied with mounting kit
• Faucet ledge (faucet not included)
❏ 0240.800 Faucet holes on 8" (203mm) centers
(Illustrated)
❏ 0240.400 Faucet holes on 4" (102mm) centers
❏ 0240.100 Center hole only
Nominal Dimensions:
610 x 559 x 864mm
(24" x 20" x 34")
521mm
(20-1/2)
Separate Components:
203mm
(8)
FINISHED WALL
OR SPLASHBACK
76mm
(3)
❏ 0240.008 Pedestal top-8" (203mm) centers
❏ 0240.004 Pedestal top-4" (102mm) centers
❏ 0240.001 Pedestal top-center hole only
❏ 733500-400 Pedestal only
216mm
(8-1/2)
508mm
(20)
Bowl sizes:
PEDESTAL ANCHORING
SCREW HOLES 5/16 DIA.
533mm (21") wide
305mm (12") front to back
152mm (6") deep
610mm
(24)
241mm
(9-1/2)
19mm (3/4) DIA. HOLES
FOR ANCHOR BOLTS
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
76mm
(3)
DRAIN
CHASE
197mm
(7-3/4)
SUPPLIES
AS REQ'D
203mm
(8)
178mm
(7)
To Be Specified:
603mm
(23-3/4)
*
1-1/4 O.D.
WASTE
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
OPEN
TO
1-1/4 O.D
TAILPIECE
864mm
FLOOR
(34)
❏ Faucet Finish:
❏ Supplies:
*527mm
(20-3/4)
FINISHED FLOOR
❏ 1-1/4" Trap:
210mm
(8-1/4)
* See faucet section for additional models available
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
*
SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J10
© 2008 AS America Inc.
Revised 2/08
|