WILLIAMSBURG™
PEDESTAL LAVATORY
VITREOUS CHINA
WILLIAMSBURG LAVATORY WITH PEDESTAL
• Vitreous china
• Turn-of-the-century detailing on lavatory and
pedestal
• Front overflow
• Supplied with mounting kit
• Faucet ledge with large deck area
(faucet not included)
❏ 0555.800 (Illustrated)
Faucet holes on 203mm (8") centers
❏ 0555.400
Faucet holes on 102mm (4") centers
Nominal Dimensions:
619 x 495 x 900mm
(24-3/8" x 19-1/2" x 35-7/16")
FINISHED
WALL
203mm
(8)
89mm
(3-1/2)
❏ 0555.008 Lavatory slab-203mm (8") centers
❏ 0555.004 Lavatory slab-102mm (4") centers
❏ 734906-400 Pedestal only
212mm
(8-1/2)
495mm
(19-1/2)
❏
PEDESTAL ANCHORING
SCREW HOLES
8mm (5/16) DIA.
Bowl sizes:
489mm (19-1/4") wide,
289mm (11-3/8") front to back,
146mm (5-3/4") deep
619mm
(24-3/8)
13mm
(1/2) DIA.
HOLES FOR
ANCHOR BOLTS
❏ 260mm
(10-1/4)
REF.
51mm
(2)
Compliance Certifications -
❏
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
203mm
(8)
203mm
(8)
SUPPLIES AS
REQUIRED
178mm
(7)
578mm
*
1-1/4 O.D.
WASTE
(22-3/4)
900mm
(35-7/16)
521mm
(20-1/2)
*
1-1/4 O.D.
TAILPIECE
To Be Specified
FINISHED
FLOOR
❏
❏
❏
❏
❏
❏
Color: White
Faucet*:
229mm
(9)
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE SUGGESTED.
❏❏PEDESTAL ANCHORING SCREWS NOT INCLUDED.
❏ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST BE TAKEN FROM
FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances
established by ANSI Standard A112.19.2.
Faucet Finish:
Supplies:
*
1-1/4" Trap:
Nipple:
These measurements are subject to change or cancellation. No responsibility is assumed for use
of superseded or voided pages.
* See faucet section for additional models available
SPS 0555
© 2004 American Standard Inc.
|