User Manual
EUROLIVE PROFESSIONAL
B2520 PRO
High-Performance 2,200-Watt PA Loudspeaker System with Dual 15" Woofers
B1800X PRO
Professional 1,800-Watt 18" PA Subwoofer
B1520 PRO/B1220 PRO
Professional 1,200-Watt 15"/12" PA Loudspeaker System
3
EUROLIVE B2520 PRO/B1800X PRO/B1520 PRO/B1220 PRO User Manual
9. Do not defeat the safety purpose of the polarized
TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED
UNDERTAKING OR REPRESENTATION. THIS MANUAL
IS COPYRIGHTED. NO PART OF THIS MANUAL MAY
BE REPRODUCED OR TRANSMITTED IN ANY FORM
Important Safety
Instructions
or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the OR BY ANY MEANS, ELECTRONIC OR MECHANICAL,
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
INCLUDING PHOTOCOPYING AND RECORDING OF ANY
KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSIC GROUP IP LTD.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Terminals marked with this symbol carry
electrical current of sufficient magnitude
to constitute risk of electric shock.
ALL RIGHTS RESERVED.
© 2013 MUSIC Group IP Ltd.
Trident Chambers, Wickhams Cay, P.O. Box 146,
Road Town, Tortola, British Virgin Islands
11. Use only attachments/accessories specified by
the manufacturer.
Use only high-quality professional speaker cables with
¼" TS or twist-locking plugs pre-installed. All other
installation or modification should be performed only
by qualified personnel.
12. Use only with the
cart, stand, tripod, bracket,
or table specified by the
LIMITED WARRANTY
For the applicable warranty terms and conditions
and additional information regarding MUSIC Group’s
Limited Warranty, please see complete details online at
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid
This symbol, wherever it appears,
alerts you to the presence of uninsulated
dangerous voltage inside the
enclosure - voltage that may be sufficient to constitute a
risk of shock.
injury from tip-over.
This symbol, wherever it appears,
alerts you to important operating and
maintenance instructions in the
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
been dropped.
accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do not
remove the top cover (or the rear section).
No user serviceable parts inside. Refer servicing to
qualified personnel.
Caution
To reduce the risk of fire or electric shock,
do not expose this appliance to rain and
15. The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device shall
remain readily operable.
moisture. The apparatus shall not be exposed to dripping
or splashing liquids and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Caution
These service instructions are for use
by qualified service personnel only.
To reduce the risk of electric shock do not perform any
servicing other than that contained in the operation
instructions. Repairs have to be performed by qualified
service personnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
LEGAL DISCLAIMER
TECHNICAL SPECIFICATIONS AND APPEARANCES
ARE SUBJECT TO CHANGE WITHOUT NOTICE AND
ACCURACY IS NOT GUARANTEED. BEHRINGER,
KLARK TEKNIK, MIDAS, BUGERA, AND TURBOSOUND
ARE PART OF THE MUSIC GROUP (MUSIC-GROUP.COM).
ALL TRADEMARKS ARE THE PROPERTY OF THEIR
RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO
LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED
BY ANY PERSON WHO RELIES EITHER WHOLLY OR
IN PART UPON ANY DESCRIPTION, PHOTOGRAPH
OR STATEMENT CONTAINED HEREIN. COLORS AND
SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT.
MUSIC GROUP PRODUCTS ARE SOLD THROUGH
AUTHORIZED FULLFILLERS AND RESELLERS ONLY.
FULLFILLERS AND RESELLERS ARE NOT AGENTS OF
MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
4
EUROLIVE B2520 PRO/B1800X PRO/B1520 PRO/B1220 PRO User Manual
1. Introduction
Thanks to its numerous features, the EUROLIVE PROFESSIONAL SERIES is the
ideal PA loudspeaker system: it is equally well-suited both for small gigs and
large stages. We have brought it to life in order to offer you a complete range
of loudspeaker choices. In doing so, we have left open all the options for
expanding your PA system. All loudspeakers feature professional inputs and
outputs (compatible to Neutrik Speakon), letting you flexibly expand your setup
whenever you need to.
◊
The following instructions are intended to familiarize you with the
specialized terminology used throughout this user’s manual, so that
you can master all the functions. After having thoroughly read the
user’s manual, store it in a safe place for future reference.
Fig. 1.2: Subwoofer connector panel (B1800X PRO)
The EUROLIVE PROFESSIONAL SERIES features professional speaker connectors
(compatible to Neutrik Speakon) that assure problem-free operation.
The Speakon connector was developed for loudspeakers with high power ratings.
If it is connected into the corresponding plug, it locks into place and cannot
accidentally be disconnected. It protects against electric shock and assures
correct polarity. Each of the plugs only carries the assigned individual signal
(see table 4.1/Fig. 1.3 and the insignia on the back of the unit).
1.1 Before you get started
1.1.1 Shipment
Your EUROLIVE speakers were carefully packed at the assembly plant to assure
secure transport. Should the condition of the cardboard box suggest that damage
may have taken place, please inspect the unit immediately and look for physical
indications of damage.
Professional speaker connector
(compatible with Neutrik Speakon connectors)
◊
Damaged units should NEVER be sent directly to us. Please inform the
dealer from whom you acquired the unit immediately as well as the
transportation company from which you took delivery of the unit.
Otherwise, all claims for replacement/repair may be rendered invalid.
◊
◊
◊
Please always use the original packaging to avoid damage due to
storage or shipping.
Never let unsupervised children play with the EUROLIVE speakers or
their packaging.
front view
rear view
Fig. 1.3: Speakon connector
Please dispose of all packaging materials in an environmentally
friendly fashion.
Please only use the commercially available Speakon cables (type NL4FC)
to connect your loudspeakers to the power amp. Verify the pin assignment
of your loudspeakers and cables depending on the loudspeaker output you
are using.
1.1.2 Initial operation
Your EUROLIVE speakers are connected to a power amplifier using the speaker
connectors located in the back. Please read ch. 5, “Additional Considerations”
and ch. 6, “Application Examples” to get important technical information and
practical suggestions about use.
1.1.3 Online registration
Please register your new BEHRINGER equipment right after your purchase
warranty carefully.
◊
Always make sure to mute your power amplifier before connecting
the speakers.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
claims more quickly and efficiently.
Fig. 1.1: B1520 PRO connector panel (B2520PRO/B1220 PRO’s are similar)
Thank you for your cooperation!
5
EUROLIVE B2520 PRO/B1800X PRO/B1520 PRO/B1220 PRO User Manual
1.2 User manual
player and “banish” them from the stage, so that they are located on firm
ground. Another option is to use raised stands, which prevent the speakers from
having a direct contact with the ground.
This user’s manual is structured in such a way to give you an overview about the
application options of your EUROLIVE PROFESSIONAL speakers, giving you at the
same time important information about optimizing your PA system. Should you
require detailed explanations about specific subjects, please visit us on the
internet at behringer.com.
2.4 Loudspeaker protection by using
a low-cut filter
Try to prevent damage to your speakers caused by extreme oscillation of the
bass membrane due to subsonic noise and extremely deep frequencies. Use an
equalizer to cut off those frequencies that fall below your speakers’ frequency
range, or use a low-cut/high-pass filter. Most equalizers and sound-improvement
systems offer a low-cut function, like the BEHRINGER ULTRAGRAPH DIGITAL
DEQ1024, for example.
2. Optimal Operation
We have developed the EUROLIVE PROFESSIONAL SERIES for use in a wide range
of possible applications. Of course, the sound of your loudspeakers depends on
the acoustic characteristics of the room/space in which they are being used.
The following chapters of this manual will give you information about getting
the most out of your EUROLIVE speakers.
Using a low-cut filter in your signal path is particularly recommended if you
use record players or CD players as your signal source. CD players often produce
extremely deep frequencies, which can lead to extreme excursions of the
bass membrane.
2.1 HF drivers
High frequencies are the segment of the audio spectrum responsible for clarity
and speech intelligibility. These frequencies are the easiest ones to locate,
but at the same time they are also the easiest ones to “obstruct.” Therefore,
we recommend positioning your speakers so that the HF drivers are located
slightly above the height of the audience. This guarantees the best possible
dispersion of high frequencies and a considerably higher intelligibility.
3. Operating Modes
3.1 BI-AMPING and PASSIVE operation
(B1800X PRO)
The EUROLIVE PROFESSIONAL SERIES subwoofer can run in two ways: in PASSIVE
and BI-AMPING mode. The B1800X PRO can be switched from BI-AMPING
to PASSIVE by using the switch located in the back. For all applications,
your EUROLIVE speakers are connected using the speaker inputs.
2.1.1 Directional pattern of asymmetrical HF drivers
An outstanding feature of the B1220 PRO, B1520 PRO and the B2520 PRO are their
asymmetrically formed horns (“Asymmetrical Dispersion Constant Directivity
Horn”). By turning the horns 90°, you can optimize the directional pattern for
both vertical and horizontal speaker positioning. The default horn setting is the
“front of house” vertical configuration, whereby the wide dispersion side (100°) is
pointed downward and the narrow dispersion side (50°) is pointed upward. If you
want to position your speaker horizontally (as a “floor” monitor), you can modify
the horn position to assure optimal dispersion
◊
Never switch the operating mode if your EUROLIVE speakers are wired
to an active signal source.
The subwoofer features an internal crossover. Running the B1800X PRO in passive
mode makes it ideally suited for working together with the 2-way B1220 PRO,
B1520 PRO and B2520 PRO systems. This way, you achieve an absolutely balanced
sound characteristic. However, if you select the BI-AMPING mode, your subwoofer
can be combined with other EUROLIVE 2-way systems. The BI-AMPING operating
mode offers several primary advantages: lower distortion, greater flexibility of
signal transmission as well as an improved overall performance of your system.
The PASSIVE operating mode has the advantage of requiring no additional
crossovers in order to keep the subwoofer’s frequency range within its limits.
(turning the horn by 90°). Please do the following:
(1) Remove the speaker cover by carefully and uniformly pulling off the
steel grill.
(2) Unfasten the four screws with which the horn is mounted.
(3) Turn the horn 90°, so that the wide dispersion side (100°) points upward
If you are using an external crossover, e.g. the BEHRINGER ULTRADRIVE PRO
DCX2496, pay attention to chapter 8, “Specifications.” There, you will find
information about the recommended crossover frequency range. We recommend
a slope rate of at least 12 dB, whereby a higher value guarantees the best possible
performance. A slope rate of 24 dB is ideal.
when the loudspeaker is lying horizontally on its side.
(4) Mount the horn back into its place with the four previously
unfastened screws.
(5) Set the grill back into its place and press gently until it snaps into position.
Our recommendations are only examples of possible interactions between
different EUROLIVE speakers. Depending on your own personal sound
requirements and the genre of the music being played, other combinations are
of course possible.
◊
No warranty claim is valid for damage caused by incorrect handling
or flawed and/or careless use.
2.2 How to prevent feedback
Always place the “front of house” speakers ahead of the microphones
(from the audience’s perspective), and never behind. Use professional floor
monitors (e.g. B1220 PRO, B1520 PRO or B2520 PRO) or an in-ear monitoring
system to hear the stage performers.
3.2 Looping through the subwoofer signal
(B1800X PRO)
The B1800X PRO subwoofer from the EUROLIVE PROFESSIONAL SERIES features
two speaker connectors. In BI-AMPING mode, the PINS 2-/2+ of the input are
connected directly with the speaker. PINS 1-/1+ of the input are connected to
the PINS 1-/1+ of the output and the signal can be simply looped through. To this
end, please adhere to the specifications given in chapter 4.
2.3 How to avoid feedback when working with
record players (DJ Applications)
In applications with record players, bass feedback can occur. Bass feedback
occurs when low frequencies get back to the pickup and are re-reproduced on
the speakers. The most common causes for this are: speakers located too closely
to the record player, a room with a wooden floor, or presence of a podium or a
platform. In such cases, it is best to move the speakers away from the record
◊
Please keep in mind that when you switch the B1800X PRO subwoofer
to BI-AMPING mode, the input signal is routed to PINS 2-/2+. In this
case, PINS 1-/1+ merely serve to loop the signal through!
6
EUROLIVE B2520 PRO/B1800X PRO/B1520 PRO/B1220 PRO User Manual
3.3 PARALLEL Input (B1220 PRO, B1520 PRO
and B2520 PRO)
The EUROLIVE B1220 PRO, B1520 PRO and B2520 PRO loudspeakers feature two
speaker inputs laid out in parallel. You can alternatively connect one of the
connectors to the output on your power amp and tap into the signal from the
amp once again on the second connector, in order to, for example, feed this
signal into an additional loudspeaker. This way, you can create stacks consisting
of speakers with different impedance values.
5.3 Fuses
We do not recommend the use of fuses with audio applications. Damage to
loudspeakers can be the result of high peak signals and high output power.
However, fuses can only offer protection from one of these two factors, and never
from both. Additionally, fuse resistors are sometimes nonlinear, leading to
distortion and unpredictable overdriving.
5.3.1 Protecting your equipment
◊
ATTENTION: Never connect the output signals of different power
amps to both parallel inputs at the same time. This may permanently
damage your setup.
•
•
•
Always try to find the optimal signal level. Try to avoid overdriving your amp
keep in mind the physical limitations of your PA system
Use a limiter to restrict the output signal level. Place the limiter between the
mixing console and the power amp. For this purpose, our proven AUTOCOM
PRO-XL MDX1600, COMPOSER PRO-XL MDX2600 and MULTICOM PRO-XL
MDX4600 compressors offer an outstanding solution. All models can be used
as a limiter: the audio signal doesn’t overdrive any more, and unpleasant
“peaks” are effectively avoided
4. Pin Assignment (B1800X PRO)
Subwoofer B1800X PRO
PINS 1-/1+
PINS 2-/2+
INPUT: Full-range input
OUTPUT: highpass output
◊
Our ULTRADRIVE PRO DCX2496 and SUPER-X CX3400/CX2310 crossovers
are particularly well-suited for protecting your equipment: for each
output, they have independent limiters.
PASSIVE
Signal loop
BI-AMPING
Signal loop
Subwoofer input
Tab. 4.1: Pin assignment
6. Application Examples
4.1 Subwoofer (PASSIVE)
•
Feed the full-range signal to the input PINS 1-/1+. The high-pass signal
can be tapped into at the output PINS 1-/1+. PINS 2-/2+ serve as a signal
loop through
6.1 Full-range stereo operation
In the following example, the main stereo output signal of a mixing console
is connected to a stereo power amplifier. A B1220 PRO is connected to each of
the amp outputs, and these speakers reproduce the entire frequency range
(full range).
4.2 Subwoofer (BI-AMPING)
•
Connect the subwoofer signal to PINS 2-/2+
XENYX 1202FX
•
PINS 1-/1+ of the input are connected to PINS 1-/1+ of the output, and can
be used to loop the signal through
•
In general, when in BI-AMPING mode, PINS 1-/1+ and PINS 2-/2+ are
looped through
L
R
5. Additional Considerations
5.1 Length and diameter of loudspeaker cables
Loudspeaker cables whose diameter is too small can limit the power amp
performance considerably. The longer the cable, the greater the problem. As a
result, musicians often simply “turn up” the amp, which can lead to loudspeaker
damage. Therefore, don’t use cables longer than 15 m (45 ft.). For most applications,
this will not be necessary. Cable diameter should be at least 2.5 - 4.0 mm2.
EUROPOWER EP2000
5.2 Power amp rating
Selecting the right amp can turn out to be rather difficult. Therefore, stick to the
following rule of thumb: the power rating of your amp should be roughly twice
the speaker load capacity. A speaker rated at 400 Watts continuous performance
can easily be powered by an amp rated at 800 Watts output power. An optimal
addition to your speaker system would be the BEHRINGER EUROPOWER EP2500
power amp, for example.
2 x EUROLIVE PROFESSIONAL B1220 PRO
Fig. 6.1:Full-range stereo operation
7
EUROLIVE B2520 PRO/B1800X PRO/B1520 PRO/B1220 PRO User Manual
6.2 Stereo operation with a subwoofer
6.3 Stereo operation with a parallel stage
monitoring system and a subwoofer
This example shows the use of two B1520 PROs as FOH loudspeakers and one
B1220 PRO used as a floor monitor on stage. The FOH loudspeakers reproduce
the main stereo output signal from the mixing console, while the stage monitor
Using a crossover, the main stereo output signal of a mixing console is split
into a stereo signal and a mono signal, whereby the mono signal covers the
lower frequency range and the stereo signal carries the rest of the frequencies.
Then, the stereo signal is connected to a stereo power amplifier. A B1520 PRO is
connected to each of the amp’s outputs. The mono subwoofer signal is connected is fed an independent monitor mix through a mono monitor send (Aux Send).
to one channel of an additional power amplifier, which is powering one
B1800X PRO subwoofer.
A separate subwoofer output feeds a B1800X PRO subwoofer with the bass
signal. Two stereo power amps are required for this application, whereby one
amp reproduces the main stereo signal, and the other one reproduces both mono
signals (subwoofer and monitor signal).
XENYX 1202FX
EURODESK SX2442FX
L
R
SUPER-X PRO
CX2310
L
R
Aux
Send
Mono-
Subwoofer
Output
Mono-
Subwoofer
Output
L
R
EP2000
EP2000
Monitor
EUROLIVE
PROFESSIONAL
B1220 PRO
2 x EUROLIVE PROFESSIONAL
B1520 PRO
EUROLIVE PROFESSIONAL
B1800X PRO
Fig. 6.2: Stereo operation with a subwoofer
2 x EUROLIVE PROFESSIONAL
B1520 PRO
EUROLIVE PROFESSIONAL
B1800X PRO
Fig. 6.3: Stereo operation with a parallel stage monitoring system and subwoofer
8
EUROLIVE B2520 PRO/B1800X PRO/B1520 PRO/B1220 PRO User Manual
7. Troubleshooting
7.1 No signal when loudspeaker is connected
7.4 Treble signal too low
•
Check the EQ settings on your mixing console or on an external EQ,
if applicable
•
Make sure that your mixing console is indeed carrying a signal (is the master
fader raised? Are channels active?) and that the gain control on your amp is
turned up
•
Make sure that the tweeters on your loudspeakers are positioned at the
same height as the ears of the people in the audience. If not, please modify
the speaker position
•
•
When using a crossover, make sure that the relevant channels are active
•
The internal tweeter fuse may have opened. In this case, please contact a
BEHRINGER service branch office near you
Check if the cable connection is interrupted/damaged somewhere in
your setup
7. 5 Bass signal too low
•
•
To test your configuration, connect another amp. If you now get a signal,
the power amp is the culprit
•
Check the EQ settings on your mixing console or on an external EQ,
if applicable
To test your configuration, connect another speaker. If you now get a signal,
the fault lies within the speaker
•
Check the speaker cable pin assignment (see fig. 1.3). Incorrect pin
assignment can cause phase cancellation and the frequency incursions
related to it
7. 2 Signal present only on one channel
•
Make sure that your mixing console is working properly (is the signal present
on both outputs (L/R)?)
7.6 Poor sound characteristics
•
Check the speaker cable pin assignment (see fig. 1.3). Incorrect pin
assignment can cause phase cancellation and the frequency incursions
related to it
•
•
If using a crossover, check if the relevant channel is active
Check if the cable connection to the silent channel and to the corresponding
speakers is interrupted/damaged somewhere along the path
•
Check if large objects (e.g. effect racks and similar equipment) are placed
in front of the loudspeakers. They too can negatively influence
sound dispersion
•
Connect the silent loudspeaker onto the amp channel that works properly.
If you now get a signal, it is the amp channel that is at fault. If you still
can not hear anything, the fault lies either within the loudspeaker or the
cables used
•
•
Check the sound quality of the input signal by listening to it on a set
of headphones
7. 3 Signal distorted
Also see the instructions in the chapters 7.3, 7.4 and 7.5
•
Make sure that all signals on the mixing console have been set to optimal
levels in order to avoid distortion
•
•
If using a crossover, check if all signals have been set to correct levels
Make sure that the power amp channels are not overdriving. If so, turn the
gain control down a little. However, it could also be the case that your power
amp doesn’t have enough power headroom, so that the required volume can
not be generated without starting to distort
•
•
•
Make sure that the level of the signal getting into the speakers is not too
high, causing distortion
Check your EQ settings. Excessively increasing the frequencies can result
in distortion
If distortion is still occurring despite everything you have tried to eliminate
it, try connecting a different power amp. If you no longer hear distortion,
its cause was with the power amp
•
•
As a test, connect another speaker. If you no longer hear distortion, its cause
was with the loudspeaker (perhaps a defective loudspeaker)
Check if the cable connection is interrupted/defective somewhere along
the path
9
EUROLIVE B2520 PRO/B1800X PRO/B1520 PRO/B1220 PRO User Manual
8. Specifications
B2520 PRO
B1800X PRO
System Data
System Data
Type
2 ½-way full-range speaker
(2 x 15" + 1.75")
Type
Subwoofer (18")
Frequency response (-10 dB)
40 Hz - 300 Hz
Frequency response (-10 dB)
Continuous Power (IEC268-5)1
Peak Power
50 Hz - 18 kHz
550 W
Continuous Power (IEC268-5)1
450 W
Peak Power
1800 W
2200 W
Impedance
8 Ω
Impedance
4 Ω
Sound pressure level (1 W @ 1 m)
Dispersion
100 dB (Half Space)
Sound pressure level (1 W @ 1 m)
Dispersion
99 dB (Full Space)
100° (50°) x 50°
200 Hz / 1.8 kHz
—
—
Crossover frequency
Crossover frequency
Components
Components
HF driver
Woofer
—
HF driver
Woofer
44T30A8
18SW400D8
2 x 15W250A8
Dimensions/Weight
Dimensions/Weight
Dimensions (W x H x D)
approx. 21 ½ x 27 5⁄8 x 21 3"
Dimensions (W x H x D)
approx. 18 5⁄16 x 46 21⁄32 x 19"
approx. 465 x 1185 x 482 mm
approx. 547 x 700 x 553 mm
Weight
approx. 90.4 lbs / 41.1 kg
Weight
approx. 104.9 lbs / 47.7 kg
BI-Amp Operation
BI-Amp Operation
Recommended crossover frequency
(external crossover network)
175 Hz
Recommended crossover frequency
(external crossover network)
—
—
Power rating/impedance woofer
450/1800 W IEC/8 Ω
Power rating/impedance woofer
10 EUROLIVE B2520 PRO/B1800X PRO/B1520 PRO/B1220 PRO User Manual
B1520 PRO
B1220 PRO
System Data
System Data
Type
2-way full-range speaker
(15" + 1.75")
Type
2-way full-range speaker
(12" + 1.75")
Frequency response (-10 dB)
Continuous Power (IEC268-5)1
50 Hz - 18 kHz
300 W
Frequency response (-10 dB)
Continuous Power (IEC268-5)1
55 Hz - 18 kHz
300 W
Peak Power
1200 W
Peak Power
1200 W
Impedance
8 Ω
Impedance
8 Ω
Sound pressure level (1 W @ 1 m)
Dispersion
96 dB (Full Space)
100° (50°) x 50°
Sound pressure level (1 W @ 1 m)
Dispersion
95 dB (Full Space)
100° (50°) x 50°
2.5 kHz
Crossover frequency 1.8 kHz
Crossover frequency
Components
Components
HF driver
Woofer
44T30A8
HF driver
Woofer
44T30A8
15W250A8
12W250B8
Dimensions/Weight
Dimensions/Weight
Dimensions (W x H x D)
approx. 18 5⁄16 x 27 5⁄8 x 19"
approx. 465 x 700 x 482 mm
Dimensions (W x H x D)
approx. 15 5⁄8 x 25 1⁄8 x 16"
approx. 397 x 638 x 406 mm
Weight
approx. 66 lbs / 30 kg
Weight
approx. 55.2 lbs / 25.1 kg
BI-Amp Operation
BI-Amp Operation
Recommended crossover frequency
(external crossover network)
—
—
Recommended crossover frequency
(external crossover network)
—
—
Power rating/impedance woofer
Power rating/impedance woofer
1 Average value over bandwidth 100 Hz - 2 kHz (multi-way systems) und 100 Hz - 250 Hz (subwoofer)
according to IEC 268-5.
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
We Hear You
|