TUBE OVERDRIVE TO100
Thank you for showing your confidence in us by purchasing the BEHRINGER TUBE
OVERDRIVE TO100. This high-quality effects pedal is ideally suited for giving electric
guitars maximum flexibility with state-of-the-art overdrive sounds that capture every nuance
of your playing—from smooth overdrive to screaming tube sounds. Thanks to its high-
performance features you get tube-like distortion, smooth sustain and super fat tone.
1. CONTROLS
Top view
The DRIVE control adjusts the intensity of the overdrive effect.
The LEVEL control adjusts the output level.
The TONE control allows you to shape your overall sound.
The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The 1/4" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be
careful not to scratch the unit.
+
The TO100 has no on/off switch. As soon as you insert the jack into the
IN connector, the TO100 begins running. When not using the TO100,
remove the jack from the IN connector. This extends the life of the
battery.
|