Technical Specifications
Version 1.0
October 2005
MINIAMP AMP800
SPECIFICATIONS
INPUT
Type
¼" TRS connector, balanced
Impedance
CMRR
approx. 20 kW, balanced, approx. 10 kW, unbalanced
40 dB typ. @ 1 kHz
PHONES OUT
Type
Impedance
Max. output level
¼" TRS connector, stereo
min. 100 W
+13 dBu @ 100 W load
LINK OUT A
Type
¼" TRS connector, balanced
SYSTEM SPECIFICATIONS
Frequency response
Dynamic range
10 Hz to 120 kHz, -3 dB
108 dB, 10 Hz to 22 kHz (100 W load)
0.007 % typ. (100 W load)
Distortion
Crosstalk
< 80 dBu @ 1 kHz
Signal-to-noise ratio
10 Hz to 22 kHz < 95 dB @ 0 dBu, a-weighted
AMPLIFIER
Max. output level
Min. output impedance
+21 dBm / 124 mW (100 W load)
47 W
POWER SUPPLY
Mains connection
Mains voltage
USA/Canada
U.K./Australia
China
Europe
Japan
Power consumption
external power supply, 9 V~ / 750 mA
120 V~, 60 Hz
240 V~, 50 Hz
220 V~, 50 Hz
230 V~, 50 Hz
100 V~, 50 - 60 Hz
11 W
DIMENSIONS/WEIGHT
Dimensions (H x W x D)
Weight
approx. 1.89" (48 mm) x 9.55" (242.6 mm) x 4.72" (120 mm)
approx. 1.09 lbs. (0,495 kg )
BEHRINGER constantly strives to maintain the highest quality standards. Modifications may be made,
if necessary, without prior notice. The specifications and appearance of the equipment may therefore
differ from those listed or illustrated.
Technical specifications and appearance subject to change without notice. The information contained herein is
correct at the time of printing. The names of companies, institutions or publications pictured or mentioned and their
respective logos are registered trademarks of their respective owners. Their use neither constitutes a claim of the
trademarks by BEHRINGER® nor affiliation of the trademark owners with BEHRINGER®. BEHRINGER® accepts
no liability for any loss which may be suffered by any person who relies either wholly or in part upon any
description, photograph or statement contained herein. Colours and specification may vary slightly from product.
Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER®
and have absolutely no authority to bind BEHRINGER® by any express or implied undertaking or representation.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical,
including photocopying and recording of any kind, for any purpose, without the express written permission of
BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark.
ALL RIGHTS RESERVED. © 2005 BEHRINGER Spezielle Studiotechnik GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany.
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
SPECIFICATIONS
3
|